วิทยุสื่อสารICOM รุ่น F2200 (เครื่องแม่)

Stable 25/10output power
A MOS-FET power amplifier provides 25/10W of stable output power. A one piece, aluminum chassis helps to keep the transceiver cool and provides durable long-lasting construction.

Optional digital unit, UT-114
The optional UT-114 provides digitally modulated and demodulated clear voice and data communication at 4.8kbps. Store up to 6 of your own callsigns, and up to 6 more from other stations. Or instead of recording a callsign, record any message of up to 20 characters. You may then make a call by sending one of your callsigns or a recorded CQ message. The digital callsign squelch allows you to choose an incoming call selected by the callsign. When connected to an external GPS receiver*, position information may be exchanged with other stations. (* NMEA 0183 output and RS-232C interface are required.)

Simple operation
The IC-2200E/-T retains a familiar user interface to the IC-2100. The large tuning dial provides easy access to active channels even without looking at the front panel. Secondary functions are easily recalled by holding the appropriate button.

Dynamic Memory Scan (DMS)
With a total of 207 alphanumeric memory channels, Icom’s exclusive DMS system allows you to scan selected memory banks by simply adding and deleting bank links.

CTCSS and DTCS operation standard
The IC-2200E/-T contains 50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.

And more...
- 24 DTMF autodial memories
- Weather channel with weather alert function (U.S.A. version only)
- DTMF code squelch and pager function with optional DTMF decoder, UT-108
- FM narrow mode switchable (Depending on version)
- Selectable squelch delay
- Built-in 10dB squelch attenuator

 

SPECIFICATIONS

GENERAL
Frequency range :
IC-2200E 136-174MHz
IC-2200-T 144-146MHz
Mode : FM
No.of memory channels : 207 (including 6 scan edges, and 1 call channel)
Operating Temp.range : -10°C to +60°C;-14°F to +140°F
Frequency stability : ±10ppm (-10°C to +60°C)
Power supply requirements : 13.8V DC ±15%
Current drain (at13.8V DC) :
Tx High at 25W 9.0A
Rx Max.audio 1.0A
Standby 0.8A
Antenna impedance : 50Ω (SO-239)
Dimensions (WxHxD) : 140x40x146mm;
(proj.not included) 5 1/2(W) × 1 9/16(H) × 5 3/4(D) in
Weight (approx.) : 1.25kg; 2.75lb

TRANSMITTER
Output power
IC-2200E : 25,10 and 5W
IC-2200-T : 10,5 and 2W selectable
Maximum frequency : ±5.0/2.5kHz
deviation
Spurious emissions : -70dBc ypical.
Microphone connector : 8-pin modular (600Ω)

RECEIVER
Receiver system : Double-conversion superheterodyne
Intermediate frequencies : 1st 21.7MHz , 2nd 450kHz
Sensitivity (at 12db SINDA) : 0.133µV TYPICAL
Squelch sensitivity : 0.100µV typical (threshold)
Selectivity :
Wide More than 6kHz at-6dB
Less than 14kHz at-60dB
Narrow Mord than 3kHz at-6dB
Less than 6kHz at-55dB
Spurious and image rejection : More than 60dB
Audio output power : More than 2.4W at 10%
(at 13.8V DC) distortion with an 8Ω load
External speaker connector : 3-conductior 3.5 (d) mm (1/8)/8Ω
All stated specifications are subject to change without notice or obligation.

Supplied accessories:
Remote control microphone, HM-133V
Microphone hanger* (*depending on version)
DC power cable, OPC-1132
Spare fuse
Mobile mounting bracket kit
All stated specifications are subject to change without notice or obligation.

OPTIONS
- HM-133V REMOTE CONTROL MICROPHONE
Remote control microphone with keypad backlighting. Same as supplied.
- HM-118N HAND MICROPHONE
Regular hand microphone.
- HM-118TN/TAN HAND MICROPHONE
DTMF microphones with keypad backlighting.
- OPC-440/OPC-647 MIC EXTENSION CABLES
OPC-440: 5.0 m (16.4 ft); OPC-647: 2.5 m (8.2 ft)
- OPC-589 MIC ADAPTER CABLE
Allows you to connect a regular 8-pin microphone.
- UT-108 DTMF DECODER UNIT
Provides DTMF decode capability with code squelch and pager operation.
- UT-114 DIGITAL UNIT
Provides digital voice and data capability at 4.8kbps (Voice + Data) with voice scrambler capabitity.
- CS-2200H + OPC-478/OPC-478U CLONING SOFTWARE + CLONING CABLE
For quick and easy programming of memories, etc.
- OPC-474 CLONING CABLE (between transceivers
- SP-10 EXTERNAL SPEAKER
- OPC-441 SPEAKER EXTENSION CABLE: 5.0m (16.4ft)
- OPC-1132/OPC-347 DC POWER CABLES
OPC-1132: 3.0 m (9.8 ft); OPC-347: 7.0 m (22.9 ft)
- MB-17A MOBILE MOUNTING BRACKET